Basic Info.
Type
Piezoresistive Pressure Sensor
Component
Mechanical Structure Type
Pressure Type
Gauge,Absolute,Sealed Gauge
Operating Temperature
-40deg;C~125deg;C
Pressure Range
0.017MPa ~ 60MPa
Specification
CE, ISO9001, SGS, ROHs
Origin
Nanjing, Jiangsu, China
Product Description
High Quality:
1. Turnkey Service
2. CE, ISO9001, RoHs
3. OEM Service
4. Accept small order
BS12 - 19 Piezoresistive OEM Pressure Sensor
Feature:
* Pressure range (0.017Mpa ~ 60Mpa);
* Gauge, absolute and sealed gauge;
* Constant current power supply;
* Isolated construction to measure various media
* Φ 19mm OEM pressure element
* 316L stainless steel material
* Perfect long term stability
* Different male thread connection optional
Application:
· Industrial process control
· Level measurement
· Gas, liquid pressure measurement
· Pressure meter
· Pressure calibrator
· Liquid pressure system and switch
· Refrigeration equipment and air conditioner
· Aviation and navigation inspection
Introduction:
General BS12 Piezoresistive Pressure Sensor
The outline, installation dimension and sealing method of BS12 is strongly interchangeable, it is widely used for measuring pressure which is compatible with stainless steel and Viton;
Assembled BS12N Piezoresistive Pressure Sensor
Put general BS12 pressure sensor into the housing with standard or special thread; Use face type seal or waterline seal; With flexible construction and strict inspecting and screening; The assembled. BS12N sensor has similar application with general type sensor, it can be used for mounting and production of different pressure instruments;
Welded BS12N-H Piezoresistive Pressure Sensor
Put general BS12 pressure sensor into the housing with standard or special thread; And weld sensor with housing together, no O-ring for sealing. The whole product has flexible construction, it has wider application fields than general pressure sensor, can be used for mounting and production of different pressure instruments;
Flush Diaphragm BS12P Piezoresistive Pressure Sensor
Flush diaphragm pressure sensor is a full-welded pressure sensor, it has pressure port G1/2 male or M20x1.5 male, sealing by Viton O-ring at the end of thread. The isolated diaphragm is welded in front of thread port, the whole measure range is 0~100kPa…35MPa. It can be used for food, medicine, sanitation fields in which the media is easily dirty.
Gauge BS12 Pressure Sensor with Vacuum Measurement
We can use general type, assembled type as well as flash diaphragm type gauge pressure sensor to measure pressure below air pressure, the min. Pressure can be around -100kPa.
Order Note
1. It is recommended that the sensor should be installed as Suspended Mode to avoid face tight press and avoid affecting sensor stability.
2. Please pay attention to protect the diaphragm to prevent any damage or bad performance.
3. If the working temperature of Viton rubber exceeds the temperature of the rubber specification or be applied in critical environment, please contact us.
4. The material of measuring medium should be compatible with the stainless steel. If it is corrosive, pls specify its material in detail.
5. Please note in the order if you need zero pressure as negative pressure.
6. All specifications are subject to change. Contact Gaohua for specifications and engineering drawings that are critical to your application. Drawings contained in this document are for reference only.
Order flow chart
A) Inquiry ----Please tell us the specification you need.
B) Determine the parameters ----- Do or can not do.
C) Sample -----If we can do them, we will send the sample to you, but freight is born by you.
D) Sample time ---we will arrange the samples in 1-3 working days.
E) Express way ----UPS, DHL, FedEx, EMS and so on, please tell us the express way you need.
Address:
No. 66 Qixia Avenue, Nanjing Economic & Technological Development Zone, Jiangsu Province, Nanjing, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001
Company Introduction:
Nanjing Gaohua Technology Co., Ltd is located in Nanjing, Jiangsu Province, China and built in 2000, which is an ISO9001: 2008, CE and RoHS qualified OEM SENSOR-manufacturer and professional exporter (exporting to more than 20 countries). Our present workshop covers about 20, 000 square meters, meanwhile we have our own advanced sensor-developing center, production center, purification center, testing center and metal processing center.
We have own patents of key technology and concentrates on pressure sensors R&D, producing variety of sensors/ transducers/ transmitters (such as pressure, temperature, humidity, Acceleration, Angle, Level etc. ).
With reliable quality and reasonable price, our products are widely used in the process measurement &control of Engineering machinery/ Automotive/ Medical/ Rail transit/ Mine/ Ship/ Internet industry etc.
For important projects which refer to various sensors, we offer one-stop service including customized sensors, standard production and agent procurement.
We looking forward to coorperate with you!