MB510-1 Differential Pressuretransmitter (9~36VDC Power supply)

High Quality:
1. Turnkey Service
2. CE, ISO9001, RoHs
3. OEM Service
4. Accept small order


MB510 Differential PressureTransmitter

Features
>316L stainless steel construction, compact size, easy installation;
>Laser welding, full-sealed construction; Protection IP67;
>High precision, wider temperature compensate range;
>Anti-impact, anti-vibration, anti-overloading;
>Temperature compensation and aging, stable performance;
>Various outline structures, accepting custom design


Introduction
MB510 Differential Pressure Transmitter adopts piezoresistive OEM differential pressure sensor as sensing element inside. The measured pressure worked on two diaphragms of the sensing emlents, through amplifier circuit, the differential pressure can be tranformed into electrical signal. MB510 has various output for choice. (millivolt, standard voltage, current, frequency etc. ).
Stainless steel housing decides its strong anti-corrosion ability. Two M20*1.5 (or customized connector dimention) pressure connectors can be installed on the measuring tube directly(or get a connection through a connecting tube).
Widely used in differential pressure measurement of petroleum, chemi-industry, power station, hydrology, navigation, aviation, HVAC etc.


Specification
Pressure Type: Differential Pressure

Medium: Liquid, gas, vapor, which is compatible with SUS304

Pressure range(MPa): 0~…0.7 or customized

Pressure range (bar): 0~…700 or customized

Pressure range (psi): 0~…100 or customized

Overload range: 200%FS

Bursting pressure: 300%FS

Power Supply: (9~36)VDC

Output signal: (0~5)V, (1~5)V, (4~20)mA

Vibration: 10~500Hz 25g

Shock resistance: 50g 11ms

Accuracy: ± 0.5%FS(typ. ) @25º C

Zero temp. Drift: ± 0.03%FS/º C

FS temp. Drift: ± 0.03%FS/º C

Long-term stability: ± 0.2%FS/Y

Insulation resistance: 250 MΩ /250V, 100MΩ /250V

Medium temp.: (-40~125)º C

Operation temp.: (-40~85)º C

Storage temp.: (-40~125)º C

Compensated temp.: (-10~80)º C

Housing: SUS304

Diaphragm: SS316L

O-ring: Viton

Protection: IP67


Order Note
1. It is recommended that the sensor should be installed as Suspended Mode to avoid face tight press and avoid affecting sensor stability.

2. Please pay attention to protect the diaphragm to prevent any damage or bad performance.

3. If the working temperature of Viton rubber exceeds the temperature of the rubber specification or be applied in critical environment, please contact us.

4. The material of measuring medium should be compatible with the stainless steel. If it is corrosive, pls specify its material in detail.

5. All specifications are subject to change. Contact Gaohua for specifications and engineering drawings that are critical to your application. Drawings contained in this document are for reference only.



Order flow chart
A) Inquiry ----Please tell us the specification you need.
B) Determine the parameters ----- Do or can not do.
C) Sample -----If we can do them, we will send the sample to you, but freight is born by you.
D) Sample time ---we will arrange the samples in 1-3 working days.
E) Express way ----UPS, DHL, FedEx, EMS and so on, please tell us the express way you need.
F) Sample test ----You will test the samples about 1 weeks. Test Results ---If the test is successful, we can arrange production orders according to samples. If the test is unsuccessful, please tell us why, for different situations, we do different processing.